• dynacast_lp_banners_dcdesign_aw.png

Get your free copy of our Die Casting Design Guide

Your biggest component production costs shouldn’t go to waste.

Yet that’s what many secondary operations will result—in fact, up to 80% of a component’s cost can be attributed to secondary operations that can be made more efficient—or eliminated altogether.


Download your copy to get the complete guide. Simply enter your details below.

Download your free copy of our Die Casting Design Guide to learn:

  • How to reduce weight on components
  • Why wall thickness adds to cost
  • What the best draft angle is for inside vs. outside surfaces
  • The one critically important factor frequently overlooked by designers

And much more. Enter your details to get instant access.

From the guide:

“Design for manufacturing (DFM) is a core methodology that ensures your die cast parts perform to specification and require the minimum of secondary operations. This is important when you consider that these operations can often represent as much as 80% of the component cost.”


©2024 Dynacast. All rights reserved

Last updated 04.24.2020