ナレッジセンター

最新の精密金属の製造の進歩についての専門的な知識を取得します

Facility Spotlight: Dynacast Peterborough

30_722_445_dynacastpeterborough_header.png

Dynacast Peterborough is located outside of Toronto in Canada and we produce parts at this facility for customers located throughout North America.  At Dynacast Peterborough, we have a variety of machines that enable us to produce a broad range of parts for our customers.

Typical Component Sizes

We serve many different industries including automotive, electronics, telecommunications, hardware industrial controls, and hand tools.

For multi-slide die casting needs, components can range up to 1800 grams (four pounds) with linear dimensions up to 200 mm (eight inches). These components can have a height up to 75 mm (three inches). 

Production Options

There are three different types of machines used for production – multi-slide, standard, and injected metal assembly.

Smaller die cast production utilizes our multi-slide machines. These machines are high-speed automatic machines that use the hot-chamber die cast method. The machines have typical cycle rates that range between 5-30 CPM. There is no secondary trimming or burring required when components are cast on these machines.

Standard die cast production utilizes Frech 80T and Frech 200T machines. These machines have typical cycle rates of 3-5 CPM. Secondary flash removal is not normally required.

IMA utilizes zinc die cast machines that are made specifically for the process. If you’d like more details on IMA, please read my blog<link to IMA blog> - you’ll learn how we use the process to lower costs and create completed parts that are stronger and more effective than other assembly methods.

Do you have any questions on Dynacast Peterborough? I’m here to help answer any questions you have. 

comments powered by Disqus
 

©2020 Dynacast. All rights reserved

最終更新日 08.16.2020