Wissenszentrum

Die Cast Material Spotlight: EZAC

30_722_398_screen_shot_2015_02_09_at_10.38.47_am.png

If you are looking for a high strength, creep resistant, zinc based alloy, keep reading. Dynacast partners with Eastern Alloys, Inc., a manufacturer of world-class zinc alloys. They are constantly working on new alloys that result in better, more economical ways to die cast. By working closely with them, Dynacast offers alloys that many of its competitors do not. It ensures that our customers are receiving the best possible alloy for their components. Recently, Eastern Alloys introduced a new zinc alloy, EZACTM and it may be the right material for your next die casting project.

Interested in learning more about EZAC? Ask one of our engineers.

Zinc Alloys

When zinc die casting first became available, it was known as the more lightweight, lower cost alloy in comparison to the other die casting alloys that were available such as tin and lead. Over the past century, there has slowly been a progression in the zinc alloys. While zinc has always been known for its high strength, the addition of the Zamak family, and now EZAC, make hot chamber die casting zinc alloys even more suitable for multiple applications. Before EZAC, zinc was often overlooked for applications requiring high tensile strength and more specifically high-temperature tensile strength. Additionally, most zinc alloys have a low creep resistance when compared with other materials. These areas of improvement were the focus when creating EZAC. 

Benefits of EZAC

The EZAC alloy has many benefits including superior creep resistance, higher yield strength, and higher hardness when compared with other zinc alloys. EZAC performs approximately fourteen times longer than Zamak 2 and three times longer than ACuZinc5 in creep resistance tests at 140C and 31MPa, achieving 730 hours.

Comparing EZAC to Other Alloys

In regards to yield strength, EZAC is comparable to ZA-27, which is the strongest cold chamber zinc die cast alloy.  With a yield strength of 396 MPa—stronger than any other hot chamber zinc die cast alloy, EZAC achieves a 42% improvement over Zamak 2 and a 19% improvement over ACuZinc5. The hardness of EZAC also shows a 19% improvement over Zamak 2 and 11% improvement compared to ACuZinc5.

To compare mechanical and physical properties of other alloys, try our metal selector tool!

While EZAC exhibits low elongation at approximately 1%, it maintains comparable Impact Strength with ACuZinc5 at 2.2ft-lbs.

Compared with other high strength zinc alloys such as ACuZinc5 and ZA27, EZAC has shown excellent castability that does not result in accelerated wear on shot end components.

If you would like to speak to our team directly, please contact one of our engineers or click here to request a quote online.

Click to learn more about EZAC

comments powered by Disqus
 

©2020 Dynacast. Alle Rechte vorbehalten

Letzte Aktualisierung 08.16.2020